Order by Phone +44 (0) 1202 233 268
High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines , Equipment and Personnel
Follow us on Twitter for new product announcements
Tech question? tech.abthermal@gmail.com
To Order: orders.abthermal@gmail.com Fax: +44 (0) 1202 830 425
Prices shown includes VAT; but shipping cost is extra.
Order Desk Tel: +44 (01202) 233 268
Go to content
Products > Insulations / Felts

Rigid Mineral Wool Insulation Board - Marine Approved - High temperature heat resistant and thermal insulating

1200°F / 550°C Continuous Exposure: Higher Intermittent

FlameShield™ Rigid mineral wool board is marine approved and hydrophobic.

Suitable for A-30 Steel Bulkhead, A-30 Steel Deck, A-60 Steel Bulkhead, A-60 Steel Bulkhead (restricted) and A-60 Steel Deck.

Reinforced aluminum foil facing on one side.  Also available plain (no facing) or with white fiberglass cloth one side.

Flame spread Index = 0, Smoke development index = 0.
(ASTM E84 (UL 723), CAN/ULC S102)

Thermal resistance: R-value/inch 75°F: 4.1 hr.ft2/BTU (0.72m2K/W)

Thermal conductivity: .24 (BTU.in/hr.ft2.°F) at 75°F

Water absorption: <1% Weight

Suitable for steel pin or wire mesh support installation.  Easily cut to size.

US Coast Guard Certificate of Approval: 164.107/16/0, 164.107/17/0, 164.109/26/0, 164.112/142/0

Transport Canada Certificate of Approval: LRTC 10-60002, LRTC 10-60001, LRTC 10-60004

Lloyds Register Certificate of Approval: SAS F090281, SAS F090280, SAS F090283
rigid mineral wool insulation board marine approved
AB Technology Group - North America Offices
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
North America Phone & Fax
Tel: +001 (610) 906-3549
Fax: +001 (610) 340-9054
Web by Archer-Technology.com
Back to content