High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Fiberglass Fibreglass Sleeve Firesleeve
High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Aviation Marine Firesleeve AS1072 AS1055
High Temperature Heat Fire and Flame Resistant Firesleeve with Velcro
AS1072 firesleeve
Firesleeve with
Velcro
·  Silicone rubber coated fiberglass sleeve (firesleeve), AS1072 aviation firesleeve, firesleeve with velcro, SnapSleeve and EAF Cable Cover Sleeve and jacket is used by companies and manufacturers worldwide to protect critical hydraulic hoses, lines, wiring and cables from heat, flame, pyro molten metal splash, slag, welding splatter grinding sparks, contamination, ozone, UV and abrasion.  Fabricated from a thick braided heavy-duty fiberglass sleeve plus the added protection of a thick layer of high-temperature silicone rubber.
High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Molten Splash Sleeve for EAF cables
EAF Cable Cover
High Temperature Heat Fire and Flame Resistant Silicone Rubber Sleeve with Snaps Molten Splash Shield
SnapSleeve
High Temperature, Heat, Flame & Pyro Resistant & Thermal Insulating Silicone Rubber Coated Fiberglass
High-Temperature & Heat Resistant Silicone Rubber Coated Fiberglass (fibreglass)


High temperature, heat, flame & pyro resistant silicone rubber coated products such as firesleeve jacket withstands Molten Metal Splash & Welding Splatter, 500°F / 260°C continuous exposure; 2200°F / 1205°C for periods up to 15 minutes and short excursions to 3000°F / 1650°C.  In addition to protection, firesleeve, tape and fabric also provide an insulation value of approximately R2.
Firesleeve

·  For Class H and Class C wiring protection, our fiberglass ThermaSleeveä with smooth silicone rubber coating withstands 260°C continuous and peaks of 290°C. Available in 6 wall thicknesses for electrical dielectric strength of 2kV to over 10kV.  UL 1441 / CSA C22.22 listed.   May also be used for hose protection.
Wire Protection Sleeve Class H & C
UL/CSA
High Temperature Heat Resistant Silicone Sponge Foam Sleeve
Silicone Sponge Sleeve
·  Our high temperature and heat resistant silicone sponge foam sleeve provides protection and insulation up to 500F / 260C.  Fabricated as a closed-cell low density sponge/foam with a low k factor (high insulation factor).
·  Available as a continuous sleeve and as a slit sleeve for retrofit installation. Color is a dark blue-gray.
·  Custom made in any ID and OD, or standard sizes of .5" ID, .75" ID, 1" ID, 1.25" ID, 1.5" ID with .5" wall thickness.
High-Temperature Silicone Rubber Coated Fiberglass Fabrics
·  Silicone rubber coated fiberglass fabrics are used to protect hydraulic hoses, lines, wiring and cables from heat, flame, molten metal splash, slag, welding splatter grinding sparks, contamination, ozone, UV and abrasion. Fabricated from a fiberglass base fabric plus the added protection of a layer of high-temperature silicone rubber. High Temperature and Heat Resistant.
High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Fireblanket Molten Splash Shield
18oz/yd2
coated two sides
34oz/yd2
coated two sides
98oz/yd2
coated one side
ThermalShield Fabric & Fireblanket
High-Temperature Silicone Rubber Coated Fiberglass Rope
·  Silicone rubber coated fiberglass rope and fabric products are used by companies and manufacturers worldwide to protect critical hydraulic hoses, lines, wiring and cables from heat, flame, molten metal splash, slag, welding splatter grinding sparks, contamination, ozone, UV and abrasion.   Fabricated from a thick braided heavy-duty fiberglass sleeve plus the added protection of a thick layer of high-temperature silicone rubber.
High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Fiberglass Fibreglass Rope
Silicone Rubber Coated Fiberglass Rope
High-Temperature, Heat Resistant & Thermal Insulating Silicone Rubber Coated Fiberglass Tape
·  Silicone rubber coated fiberglass tape is used to protect critical hydraulic hoses, lines, wiring and cables from heat, flame, molten metal splash, slag, welding splatter ,grinding sparks, contamination, ozone, UV and abrasion.
·  Fabricated from a knitted heavy-duty fiberglass tape plus the added protection of a thick layer of high-temperature silicone rubber. This tape provides thermal and electrical insulation, energy savings and personnel protection.
High Temperature Heat Fire and Flame Resistant Silicone Rubber Coated Fiberglass Fibreglass Tape
Silicone Rubber Coated Fiberglass Tape Wrap
High-Temperature Silicone Rubber Sealant and Liquid Seal-Dip
·  High Temperature Sealant is our special formulation of high-temperature silicone rubber, packaged
    into a convenient caulking tube, for use on mechanical joints, as a potting compound; anywhere
    a high-temperature adhesive/sealant is required.  2 grades: +260°C and +300°C continuous.
·  Liquid Seal-Dipä is a special formulation of our high-temperature silicone rubber which is a liquid
    until exposed to air, when it cures rapidly into a flexible protective covering of silicone rubber.
    Perfect for protecting the ends of sleeve and tape from fraying, or from contamination, and from
    wicking liquids such as water, oil, hydraulic fluid, etc. Usually used as a dip for sleeve and rope.
High Temperature Silicone Rubber Sealant
High Temperature Silicone Rubber Liquid Seal Dip
Liquid Seal-Dip
High Temp Sealant
Other High Temperature and Heat Resistant Silicone Rubber Products
500°F / 260°C continuous rating with weld splatter / molten metal splash protection

Materials that resist catching fire, burn slowly, or retard burning can be described as either "incombustible", "non-flammable", "non-combustible", "fire-resistant" or "fire-retardant".  "Self-extinguishing" materials cease burning once the flame or heat source is removed.  "Fireproof" is understood to mean that an object cannot burn, but few materials are truly fireproof. 

Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature.  They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.

Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler
ä.  All products are non-asbestos and 100% asbestos free
ZipSleeve