Firesleeve: SAE AS1072 High Temperature, Heat, Flame, Fire & Pyro Resistant
Aviation / Marine Grade
Cross-Reference Table
(Allows qualified hose assemblies to pass AS1055D testing)
Aviation - Aerospace SAE AS1072 grade firesleeve
This aviation / aerospace and marine grade high temperature, heat, flame and pyro resistant firesleeve jacket  is manufactured to SAE AS1072 standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75.

It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.

Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
SAE AS1072 Aviation / Aerospace Firesleeve
Firesleeve is available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 25 size steps.

Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these products (firesleeve), providing excellent burn-through protection.
Firesleeve Pyro Resistant Jacket Withstands Molten Splash & Welding Splatter.  Withstands 500°F / 260°C continuous exposure; 2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.